| |
|
|
|
|
| THE RAINCOTE - Complete water Proofing & Repair Solutions |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Dr. Fixit Raincoat |
High performance acrylic elastomeric, exterior waterproof coating
Pack Size: 1, 4, & 20 litre |
| Application Areas |
 For external rain lashed walls as a heavy duty waterproof coating |
| Features & Benefits |
| Heavy duty, waterproof coat for external walls |
| No water dilution at site |
| 2 time thicker than normal exterior paint. |
| Higher binding property & more durability |
| Bridges cracks up to 0.5 mm width |
| UV and stain resistant |
| Anti-algae & anti-fungal |
| Low dirt pickup |
| Can be tinted as normal paint on machine |
| Coverage : 35 sq.ft/ltr for 2 coats on normal cement / sand surface
(Coverage may vary, depending upon porosity & texture of substrate) |
|
 |
| Dr. Fixit Heatshield |
Heat resisting / reducing exterior coating
Pack Size: 1, 4 & 20 litre |
| Application Areas |
| External and internal masonry & plaster walls |
| Roofs & walls of residential and commercial buildings (new & old) |
| Suitable for any surface e.g. concrete, metal, timber, asbestos etc., |
| Cold storage units from outside |
| Fuel and water tanks |
| Features & Benefits |
| Excellent heat & UV resistant properties |
| Energy saving, cuts electricity bills on air -conditioners |
| Single component, easy to apply, Non-toxic/ resistance to algae and fungus |
| Waterproofing properties |
| Coverage : 30 sq.ft/ltr per coat
(Coverage may vary, depending upon porosity & texture of substrate) |
|
 |
| Dr. Fixit Primeseal |
Efflorescence resistant penetrating primer for Rain coat, Newcoat & Heatshield
Pack Size: 1, 10 & 20 litre |
| Application Areas |
| Used as a sealer & binding coat prior to Raincoat, Newcoat & Heatshield application |
| Features & Benefits |
| Good binding of chalky and porous substrates |
| Used as a primer on internal & external surfaces |
| Based on chemically inert polymer hence suitable for higher alkaline substrates |
| Provides deep penetration that imparts excellent substrate adhesion |
| Provides excellent efflorescence resistance by blocking capillaries & pores. |
| Coverage : 8-10 m2/ltr/coat (Coverage may vary, depending upon porosity & texture of substrate) |
|
|
| Dr. Fixit Newcoat |
Heavy duty, reinforced acrylic coating
Pack Size: 4 & 20 litre |
| Application Areas |
| Over existing leaking terrace without dismantling old waterproofing system like brick bat coba, concrete screeds etc. |
| Flat and sloped roofs with large spans |
| Features & Benefits |
| Allows foot traffic. |
| Bridges cracks up to 2 mm wide. |
| Re-waterproof existing waterproofing systems like brick bat coba etc without breaking. |
| Ready to use, easy application. |
| Available in 3 colors, for controlled application & aesthetics. |
| Excellent UV resistance. |
| No protection required. |
| Coverage : 1.5 lit / m2 in 3 coats at 1 mm thickness |
|
|
| Dr. Fixit Roofkote |
A general purpose waterproofing bitumen emulsion
Pack Size: 18 kg tin |
| Application Areas |
| Waterproofing for roof, wall, gutter, concrete, metal, tile, wood, plastic etc. |
| As a mastic roof leveling course & waterproof coating |
| For small spacing in new roofs |
| Features & Benefits |
| Roofkote is a viscous dark brown smooth cream water borne bitumen emulsion & is of suitable consistency for application
in relative thick films by brush or mop and bond firmly to
either dry or damp surfaces. |
| Roofkote is used for waterproofing when damp and leakage
are main problems. |
| It is applied by brush with reinforcement polyester to provide
a weather proof membrane without jointing or overlapping,
because the polyester could achieve complete continuity and
integrating all over the roof. |
| Coverage : 0.5 Kg/m2/coat |
|
|
| Dr. Fixit Roofseal |
Liquid applied Elastomeric waterproofing membrane
Pack Size: 18 kg pail |
| Application Areas |
| Exposed and concealed roof for waterproofing application for New Roofs on slabs |
| Damp proofing |
| Wet area waterproofing |
| Features & Benefits |
| Excellent elastomeric properties , can easily accommodate all normal building movements to retain a water seal |
| Can be applied to complex shapes to form a jointless and highly durable waterproofing membrane |
| Easy to apply by brush |
| Excellent adhesion to the building surfaces including felt, brick, metal etc. |
| Excellent water vapor transmission |
| Good chemical resistant (alcohol, salt solution, mild acid & alkali) |
| Coverage : 1 ltr / m2 |
|
|
|
|
|
|
| Top |
|
